wpa_supplicant v2.8-devel
random: getrandom() support available
Successfully initialized wpa_supplicant
Initializing interface 'wlxd03745df8068' conf 'wireless.conf' driver 'nl80211,wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'wireless.conf' -> '/sysroot/home/fabi/wireless.conf'
Reading configuration file '/sysroot/home/fabi/wireless.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=17):
     46 72 69 74 7a 62 6f 78 21 20 37 33 36 32 20 53   Fritzbox! 7362 S
     4c                                                L               
PSK (ASCII passphrase) - hexdump_ascii(len=20): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='Fritzbox! 7362 SL'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:10
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
nl80211: interface wlxd03745df8068 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x563830bbaec0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0104
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 01 04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=040a
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=040b
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=040c
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=040d
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=090a
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=090b
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=090c
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=090d
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0409506f9a09
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=7f506f9a09
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0409506f9a1a
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0801
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 08 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=12
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=1): 12
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=06
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0a07
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0a11
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0a1a
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=1101
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 11 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=1102
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 11 02
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0505
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 05 05
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x563830bbaec0 match=0500
nl80211: kernel reports: Match already configured
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 05 00
nl80211: Failed to register Action frame processing - ignore for now
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlxd03745df8068 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[NO_IR]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[NO_IR]
wlxd03745df8068: Own MAC address: ee:a8:c3:a7:30:56
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlxd03745df8068) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlxd03745df8068: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlxd03745df8068: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlxd03745df8068: WPS: UUID based on MAC address: 3be952e1-0a99-5f84-bd68-f02a4ca1b4d2
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlxd03745df8068: Added interface wlxd03745df8068
wlxd03745df8068: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlxd03745df8068 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlxd03745df8068: State: DISCONNECTED -> SCANNING
wlxd03745df8068: Starting AP scan for wildcard SSID
wlxd03745df8068: Add radio work 'scan'@0x563830be5560
wlxd03745df8068: First radio work item in the queue - schedule start immediately
wlxd03745df8068: Starting radio work 'scan'@0x563830be5560 after 0.000013 second wait
wlxd03745df8068: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: Own scan request started a scan in 0.000039 seconds
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
wlxd03745df8068: Scan completed in 1.206675 seconds
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 1
wlxd03745df8068: BSS: Add new id 0 BSSID 34:81:c4:2a:37:14 SSID 'FRITZ!Box 7362 SL' freq 2462
wlxd03745df8068: BSS: Add new id 1 BSSID 88:bd:45:79:3e:02 SSID 'AndroidAP' freq 2452
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=1 ext=0)
wlxd03745df8068: Radio work 'scan'@0x563830be5560 done in 1.207887 seconds
wlxd03745df8068: radio_work_free('scan'@0x563830be5560): num_active_works --> 0
wlxd03745df8068: Selecting BSS from priority group 0
wlxd03745df8068: 0: 34:81:c4:2a:37:14 ssid='FRITZ!Box 7362 SL' wpa_ie_len=22 rsn_ie_len=20 caps=0x1431 level=-39 freq=2462 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: 1: 88:bd:45:79:3e:02 ssid='AndroidAP' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-86 freq=2452 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: No suitable network found
wlxd03745df8068: Setting scan request: 5.000000 sec
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: External program started a scan
wlxd03745df8068: Starting AP scan for wildcard SSID
wlxd03745df8068: Determining shared radio frequencies (max len 1)
wlxd03745df8068: Shared frequencies (len=0): completed iteration
wlxd03745df8068: Add radio work 'scan'@0x563830be5830
wlxd03745df8068: First radio work item in the queue - schedule start immediately
Delay radio work start until externally triggered scan completes
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 2
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=0 ext=1)
wlxd03745df8068: Do not use results from externally requested scan operation for network selection
wlxd03745df8068: Starting radio work 'scan'@0x563830be5830 after 0.831252 second wait
wlxd03745df8068: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: Own scan request started a scan in 0.000046 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
wlxd03745df8068: Scan completed in 1.179081 seconds
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 3
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=1 ext=0)
wlxd03745df8068: Radio work 'scan'@0x563830be5830 done in 1.192201 seconds
wlxd03745df8068: radio_work_free('scan'@0x563830be5830): num_active_works --> 0
wlxd03745df8068: Selecting BSS from priority group 0
wlxd03745df8068: 0: 34:81:c4:2a:37:14 ssid='FRITZ!Box 7362 SL' wpa_ie_len=22 rsn_ie_len=20 caps=0x1431 level=-39 freq=2462 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: 1: 88:bd:45:79:3e:02 ssid='AndroidAP' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-86 freq=2452 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: No suitable network found
wlxd03745df8068: Setting scan request: 5.000000 sec
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: External program started a scan
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 4
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=0 ext=1)
wlxd03745df8068: Do not use results from externally requested scan operation for network selection
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
wlxd03745df8068: Starting AP scan for wildcard SSID
wlxd03745df8068: Determining shared radio frequencies (max len 1)
wlxd03745df8068: Shared frequencies (len=0): completed iteration
wlxd03745df8068: Add radio work 'scan'@0x563830be9200
wlxd03745df8068: First radio work item in the queue - schedule start immediately
wlxd03745df8068: Starting radio work 'scan'@0x563830be9200 after 0.000018 second wait
wlxd03745df8068: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: Own scan request started a scan in 0.000057 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
wlxd03745df8068: Scan completed in 1.210146 seconds
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 5
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=1 ext=0)
wlxd03745df8068: Radio work 'scan'@0x563830be9200 done in 1.211403 seconds
wlxd03745df8068: radio_work_free('scan'@0x563830be9200): num_active_works --> 0
wlxd03745df8068: Selecting BSS from priority group 0
wlxd03745df8068: 0: 34:81:c4:2a:37:14 ssid='FRITZ!Box 7362 SL' wpa_ie_len=22 rsn_ie_len=20 caps=0x1431 level=-39 freq=2462 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: 1: 88:bd:45:79:3e:02 ssid='AndroidAP' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-86 freq=2452 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: No suitable network found
wlxd03745df8068: Setting scan request: 5.000000 sec
wlxd03745df8068: Starting AP scan for wildcard SSID
wlxd03745df8068: Determining shared radio frequencies (max len 1)
wlxd03745df8068: Shared frequencies (len=0): completed iteration
wlxd03745df8068: Add radio work 'scan'@0x563830bef330
wlxd03745df8068: First radio work item in the queue - schedule start immediately
wlxd03745df8068: Starting radio work 'scan'@0x563830bef330 after 0.000017 second wait
wlxd03745df8068: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: Own scan request started a scan in 0.000066 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
wlxd03745df8068: Scan completed in 1.209437 seconds
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 6
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=1 ext=0)
wlxd03745df8068: Radio work 'scan'@0x563830bef330 done in 1.210662 seconds
wlxd03745df8068: radio_work_free('scan'@0x563830bef330): num_active_works --> 0
wlxd03745df8068: Selecting BSS from priority group 0
wlxd03745df8068: 0: 34:81:c4:2a:37:14 ssid='FRITZ!Box 7362 SL' wpa_ie_len=22 rsn_ie_len=20 caps=0x1431 level=-38 freq=2462 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: 1: 88:bd:45:79:3e:02 ssid='AndroidAP' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-86 freq=2452 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: No suitable network found
wlxd03745df8068: Setting scan request: 5.000000 sec
wlxd03745df8068: Starting AP scan for wildcard SSID
wlxd03745df8068: Determining shared radio frequencies (max len 1)
wlxd03745df8068: Shared frequencies (len=0): completed iteration
wlxd03745df8068: Add radio work 'scan'@0x563830be6320
wlxd03745df8068: First radio work item in the queue - schedule start immediately
wlxd03745df8068: Starting radio work 'scan'@0x563830be6320 after 0.000012 second wait
wlxd03745df8068: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 00 00 00 00 01 00 00 40
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: Own scan request started a scan in 0.000057 seconds
RTM_NEWLINK: ifi_index=3 ifname=wlxd03745df8068 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlxd03745df8068
wlxd03745df8068: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlxd03745df8068: Event SCAN_RESULTS (3) received
wlxd03745df8068: Scan completed in 1.205514 seconds
nl80211: Received scan results (2 BSSes)
wlxd03745df8068: BSS: Start scan result update 7
BSS: last_scan_res_used=2/32
wlxd03745df8068: New scan results available (own=1 ext=0)
wlxd03745df8068: Radio work 'scan'@0x563830be6320 done in 1.206706 seconds
wlxd03745df8068: radio_work_free('scan'@0x563830be6320): num_active_works --> 0
wlxd03745df8068: Selecting BSS from priority group 0
wlxd03745df8068: 0: 34:81:c4:2a:37:14 ssid='FRITZ!Box 7362 SL' wpa_ie_len=22 rsn_ie_len=20 caps=0x1431 level=-41 freq=2462 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: 1: 88:bd:45:79:3e:02 ssid='AndroidAP' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-86 freq=2452 
wlxd03745df8068:    skip - SSID mismatch
wlxd03745df8068: No suitable network found
wlxd03745df8068: Setting scan request: 5.000000 sec
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlxd03745df8068
wlxd03745df8068: nl80211: Scan trigger
wlxd03745df8068: Event SCAN_STARTED (46) received
wlxd03745df8068: External program started a scan